CyberPower VP1000ELCD-FR

You've probably already experienced the nightmare of a power supply interruption minutes before you wanted to save your work. Your work has gone into the ether, and you must start from scratch. Repeats of such tragedies can be warded off by the CyberPower VP1000ELCD-FR replacement backup source. This hardware is practically a premium battery backup that powers all devices that need electricity. The CyberPower VP1000ELCD-FR backup power uses the Line interactive design approach. Off-line is seen as the most basic form if the electricity is interrupted because it switches to the internal battery for electric power. The line interactive UPS also adds voltage regulation to prevent damage from dangerous surges and spikes.

CyberPower VP1000ELCD-FR Backup Power Supply Key Features

• Backup power design: Line interactive
• Actual performance: 550 W
• At maximum load, the UPC will run for 1 min

An important attribute is the UPS run time during outages. This depends on the power consumption of the connected appliances – for example, at half-load (50%), the run time will last a longer amount of time. The load of the backup source determines the operating time, which at full load (100%) is 1 min and at half the energy consumption, it is 9 min. It is therefore necessary to determine the power consumption of the connected computers, monitors and other electronics and it is best to add some spare power left. The CyberPower VP1000ELCD-FR shows the apparent power as 1000, but realistically, the actual power usage is 550 W.