All your presents at your fingertips Christmas Lights

Phoenix - Lightning Network in your pocket, easily and clearly




The payment network known as the Lightning Network, which functions as the second layer of the Bitcoin protocol, has been with us for more than two years. But as is generally the case with the development of complex and robust systems, which Bitcoin certainly is in itself, it takes a long time to find the right ways not only in terms of technical solutions, but also user-friendliness. ACINQ is one of the leading innovators in this field and at the end of 2019 decided to give the world a gift in the form of a Phoenix wallet - a second-generation LN wallet.

Phoenix - Lightning Network in your pocket, easily and clearly – TABLE OF CONTENTS

  1. Why a second generation wallet?
  2. Features - Advantages, Disadvantages and Compromises
  3. Simple from the first opening
  4. I receive and pay as I want
  5. Wallet for non-demanding users

Why a second generation wallet?

As is often the case with new protocols, it is very difficult to use and manage them in the long run. It was the same with the Lightning Network and the wallets built on it. Users had to manually manage the opening and closing of payment channels, liquidity in these channels, backup of the state of channels, to which nodes the users are connected and sending transactions was not reliable at all.


Lightning Network is the so-called second layer above the Bitcoin protocol. Its main goal is to enable small, cheap and fast payments, but without the need to write every small payment in the blockchain. You can read more about Lightning Network in our article here. here.

Although the state of technology was constantly improving, the user experience (UX) lagged behind. This also applied to the first mobile LN wallet Eclair from ACINQ, which although good for its time, failed to shield users from these technicalities.

It didn't take long for developers to realize that if they wanted the best UX, they didn't have to reinvent the wheel - just look at existing Bitcoin wallets (which users are used to) and take what works. There is no need to burden the user with unnecessary technical matters if the application can do the work for him. And so the second generation LN wallet was created. Phoenix was born.

Bitcoin wallet from the future? Let's take a look at that.

Features - Advantages, Disadvantages and Compromises

It will probably be disappointing for some readers that Phoenix is currently only available for Android devices. However, it is not necessary to despair for a long time, the developers are working hard on the version for iOS, which should be available in 2021.

The first and basic feature of every bitcoin wallet should be that it is so-called non-custodial, i.e. the user has full control over the private keys and they do not leave his device (unless he hands them over to someone himself). So all the bitcoins in your Phoenix wallet are really yours, even if ACINQ or the entire Lightning Network disappears overnight.

The wallet uses a 12-word seed for backup according to the BIP39 standard, however, since it is an LN wallet, developers warn against importing seed into several wallets at once, which could cause problems.

Phoenix; Lightning Network; Bitcoin
It is important to keep your funds safe. For security reasons, the wallet will ask you to unlock it - it is possible to unlock the wallet with a PIN or with a fingerprint reader.

In addition to the English language, Phoenix supports seven other languages, including Czech, but the disadvantage is that the language cannot be switched manually and is set according to the system language. However, what can be changed is the setting of the displayed currencies - we can display bitcoin or its various denominations (satoshi, mili-bitcoin) and for conversion to national currencies we have a choice of several options, including the Czech one. If someone is especially careful to not show everyone the balance on the phone display, they can turn off the balance display on the main page.

Phoenix; Lightning Network; Bitcoin
The settings of the wallet are clear and for the average user there should be no trouble to change the displayed currency or color scheme.

Phoenix also includes the option of switching the color scheme to a light or dark theme, or according to the system settings - this will relieve your eyes if you like to pay in the dark or you’re eager to check your balance at night.

Finally, Phoenix also has the option for users to connect exclusively through the Tor network, which hides their real IP address and thus improves the user's anonymity. It is also possible to connect Phoenix to your own Electrum server (even via Tor) and not rely on third-party servers.

Phoenix; Lightning Network; Bitcoin
If you activate the connection via Tor, then Phoenix will communicate exclusively through it.

This all is almost top-notch, but the developers had to make a few compromises so that the Phoenix wallet could have such a good UX, and these compromises were mainly about privacy and the need to trust ACINQ. Because your Phoenix wallet only connects to ACINQ nodes, ACINQ knows the information about the payments you make.

Phoenix; Lightning Network; Bitcoin
ACINQ is transparent about the trade-offs they have had to make in order to achieve such good user friendliness. For a detailed description, we recommend reading their blog article introducing Phoenix.

Fortunately, ACINQ is fully transparent about these trade-offs and intends to minimize them to pose an even lower risk in the future (see adding a Tor connection). However, do not expect the possibility to connect to your own LN node.

Simple from the first opening

The creators claim that Phoenix has the same UX as a standard bitcoin wallet. While this statement may seem foolish to some, perhaps because the UX of classic bitcoin wallets may not seem ideal to them, it is still a big step.

Phoenix, like other wallets, works by prompting the user to create a new wallet or restore from a backup the first time it is started. At the same time, it allows you to turn on the connection via Tor at the start and connect to your own Electrum server, so that you no longer have to rely on other nodes when creating your wallet.

Creating and renewing a wallet is a simple operation and only takes a few seconds. The user can immediately start using the wallet.

It only takes a few seconds to create a new wallet, after which the user is immediately taken to the main page, where an important warning is displayed for him to back up his wallet (using a 12-word seed) and, if necessary, set a PIN for security. In addition to PIN locking, Phoenix also supports biometric locking, i.e. using a fingerprint reader.

Furthermore, we can change settings and receive and send payments both on-chain and via the Lightning Network.

Phoenix; Lightning Network; Bitcoin
The main screen shows the balance, existing incoming and outgoing payments, and a few basic actions - no more is needed.

I receive and pay as I want

A significant difference compared to other LN wallets is that in the Phoenix wallet there is no difference between the so-called on-chain and off-chain balance - there is no on-chain balance. All the bitcoins you have in Phoenix are locked in the Lightning Network channels.


The terms "on-chain" and "off-chain" distinguish transactions that are written to the blockchain. A typical bitcoin transaction, which miners have to mine in order to include in the blockchain, is therefore referred to as on-chain. Off-chain transactions are those that are not written to the blockchain - for example, one person sells his private keys to another in exchange for cash.

Because transactions in the Lightning Network are not written to the blockchain, even if they are valid bitcoin transactions, we refer to them as off-chain.

In order to pay, we must first receive some bitcoins. This can be done easily using the Receive button. The wallet generates a Lightning Network request to receive a payment, for which the required amount and label can be set, as in other LN wallets.

"But how do I receive payment through the Lightning Network when I don't have any channels open," the obvious question might be. Simply put, Phoenix can automatically create a new channel on-the-fly. So there is no need to deal with incoming or outgoing liquidity and channel settings - Phoenix will take care of everything itself. 0.1% of the incoming amount is used as a fee for ACINQ for this service.

Phoenix; Lightning Network; Bitcoin
When you go to the payment receive screen, a payment request is automatically created that can be scanned or shared. There is also an option to use the LNURL link.

The same simplicity applies to incoming on-chain payments. Just use the “Show bitcoin address” button on the receive screen and the wallet will generate a standard address in bech32 format. When the other party sends bitcoins to this address, Phoenix automatically creates a new LN channel. This operation, which replaces the incoming on-chain with off-chain bitcoins, is called a swap-in and ACINQ again charges a small fee for it (0.1% of the amount).

Phoenix; Lightning Network; Bitcoin
Accepting on-chain payments is as easy as accepting LN payments, just display the address.

Perfect, we can already receive on-chain and off-chain payments without any worries, so how do we pay? Phoenix can automatically detect whether it is scanning a Lightning Network payment request or a simple bitcoin address and acts accordingly. In the case of an LN request, it asks the user to confirm the payment and sends the payment immediately. In the case of sending to a bitcoin address, it is possible to change the sent quantity and Phoenix will then do a so-called swap-out, i.e. it will send an LN payment to the ACINQ node, which will make an on-chain payment for it. Again, everything takes only a few seconds.

The main advantage of Phoenix is that it is a full-fledged LN wallet, but all the hard work is done by the ACINQ nodes to which our wallet is connected. ACINQ charges a small fee for creating channels.

Phoenix; Lightning Network; Bitcoin Phoenix; Lightning Network; Bitcoin/>
Scanning the QR code or entering a payment request is user-friendly and the payment is completed within a few seconds within the Lightning Network.

Incoming and outgoing payments can be viewed retrospectively and their labels edited. In the wallet settings, it is also possible to check the status of individual LN channels, mainly their liquidity. In the settings we will also find the option to close all channels and send the remaining balance to a bitcoin address outside the Phoenix wallet. This option will be especially useful for users who no longer want to use Phoenix or want to reset the state of their channels.

Wallet for non-demanding users

As we have already found in the previous lines, Phoenix strives to be mainly a wallet that will make it as easy as possible for its users to receive and send bitcoin payments - regardless of whether on-chain or via Lightning Network. However, this can only be achieved if the user will not be able to change and reconfigure everything.

Phoenix; Lightning Network; Bitcoin
The user can view older payments, or even add a label.

So we can say that Phoenix is mainly aimed at users who just want to pay with bitcoin, but don’t want to be bothered with the technical background or do not need to set things up in their own way. It could almost be compared to Protonmail or similar mail clients - there is no need to run your own mail server if someone does it well for me and provides it as a service.

The target group of Phoenix will almost certainly not include people who are extremely eager for transactional privacy and anonymity. People who don't want to use Lightning Network and on-chain payments are enough for them are also probably out of the game. But for all the others who want to pay without much worries and at the same time do not want to run their own LN node, you can say: Phoenix is here for you!

Phoenix from ACINQ is a wallet with probably the best thought-out user interface on the market. While it doesn't offer as much in terms of setup, privacy or sovereignty as other Lightning Network wallets, it outperforms them all in usability.

Hardware Wallet - encryption, supports 500 currencies, USB-C, microSD, Password Manager

€195.67 excl.VAT €161.71
Arriving Soon > 5 pcs
Expected 09/12/2021
Order Code: TREZBIT1d
TREZOR Bitcoin Wallet White
Hardware Wallet - encryption, OLED display 128x64, easy to use, compatible with Windows, OS X, Linux, USB

€64.66 excl.VAT €53.44
Arriving Soon > 5 pcs
Expected 13/12/2021
Order Code: TREZBIT
Ledger Bitcoin Wallet Nano S
Hardware Wallet - Encryption, easy to use on Windows, OS X, Linux, BIP39 / BIP44, micro USB

€62.35 excl.VAT €51.53
In stock > 5 pcs
Order Code: TREZBIT6
Ledger Nano X
Hardware Wallet - encryption, easy to use with Windows, OS X, Linux, BIP39/BIP44, USB-C, Bluetooth, iOS/Android compatibility

€125.09 excl.VAT €103.38
Arriving Soon > 5 pcs
Expected 13/12/2021
Order Code: TREZBIT7d
TREZOR Bitcoin Wallet Black
Hardware Wallet - coded, OLED display 128 x 64, easy to use with Windows, OS X, and Linux, USB

€64.66 excl.VAT €53.44
Arriving Soon > 5 pcs
Expected 06/12/2021
Order Code: TREZBIT1
My Alza Log In Shipping & Payment About Us
Shipping to:
Select Settings

Why buy from us? You can buy without registering with us More info »
We will call you and advise you professionally
+420 225 340 120
Order inquiry
Question about the product
Please enter your telephone:
Call me
We care about your privacy a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.
More information Less info